Tialing Disposal System For Mineral Beneficiation Plant

In an Ore Beneficiation Plant, there is always a lot of tailing produced with high water content, which will take a lot space if it's not properly handled, and it will waste a lot of water resource, so it is the ideal solution if the water in the talings is effectively recycled, and the tailing can be handeld more easily. the tailing dewatering screen is to solve the problems above mentioned, it can reduce the water content less than 15%, so it is an effective device for tailings processing. and the tailing can be easily transported to the other location or for pit fill. after dehydrating the tailings, the water can follow to a thickener, which will purify the water and make it reusable for the ore processing plant. 

Tailing Dewatering Screen, also regarded as tailing dehydrating screen, is an effective tailing disposal system that separates the solids from water, as its screen sieve often adopts Polyurethane, so it's also called PU dewatering screen, it's suitable fo dewater materials of fine and coarse particles, such as for coal washing plant, Sand Washing Plant, mineral tailing Beneficiation Plant, as the water content is quite high, so it's necessary to reduce the water content for the following process. besides the dewatering function, Tailing Dewatering Screen can also be used for its desliming, rinsing funcions. the main component of dewatering vibrating screen consits of frame, spring, vibrating motor, screen. Tailing Dewatering Screen adopts dual-motor self-synchronization technology. Motors coordinate with universal eccentric and adjustable amplitude vibrator. when dual-motors start to work,centrifugal forces which generate by the eccentric motors will superposition themselves and forming a single direction vibration. when the material with high water content feeds to the PU Dewatering screen, the water will flow to the lower part while the material move forward and separate from the water. 

Main Technical Parameter of PU Tailing Dewatering Screen /tailing disposal system

Features of PU Tailing Dewatering Screen /Tailing Dehydrating Screen

1. High working frequency, heavy vibrating intensity, low moisture of product on the screen, high capacity. When used for tailing dehydration, it can get higher solid recycle.
2. The adoption of auto-synchronization principle, motor drives vibrator by tyre coupling, the structure is simple and the noise is low.
3. Side push plate of screen surface adopts to polyurethane material, long service life, and it can protect the frame efficiently.
4. Single deck or double deck design
5. Incline or horizontal installation
6 Screen media: rubber, polyurethane, woven wire or perforated.
7. Suspension: steel coil springs or molded rubber buffers.

8.High dehydrating ratio, the water content of final sand is within 12%-15%.